Skip to content Skip to sidebar Skip to footer

Astm D4169-16 Pdf Free Download

Skip to content
Medical Package Testing Logo

ASTM-D4169

ASTM-D4169 Ruben J. Osuna 2019-05-01T16:37:27+00:00

ASTM-D4169
Standard Practice for Performance Testing of Shipping Containers and Systems

ASTM-D4169 describes the standard practice for performance testing of shipping containers and systems. It provides a guide for the evaluation of shipping units in accordance with a uniform system, using established test methods at levels representative of those occurring in actual distribution. The recommended test levels are based on available information on the shipping and handling environment, and current industry/government practice and experience.

The tests should be performed sequentially on the same containers in the order given. For use as a performance test, this practice requires that the shipping unit tested remain unopened until the sequence of tests are completed. If used for other purposes, such as package development, it may be useful to open and inspect shipping units at various times throughout the sequence. This may, however, prohibit evaluating the influence of the container closure on container performance.


Scope

  • 1.1 This practice provides a uniform basis of evaluating, in a laboratory, the ability of shipping units to withstand the distribution environment. This is accomplished by subjecting them to a test plan consisting of a sequence of anticipated hazard elements encountered in various distribution cycles. This practice is not intended to supplant material specifications or existing preshipment test procedures.
  • 1.2 This practice does not include performance testing of packages for single parcel shipments.
  • 1.3 The suitability of this practice for use with hazardous materials has not been determined.
  • 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

ASTM D4169 Distribution Cycle 13: Air (intercity) and motor freight,
local single package up to 150 lb

ASTM D4169-05, DC=13 – testing sequence and types

Sequence Test Type Standard Schedule Description
1 Drop ASTM D5276 A Handling
2 Compression ASTM D642 C Vehicle Stacking
3 Fixed Vibration ASTM D999 F Loose-Load Vibration
4 Vaccum ASTM D6653 I Low preassure*
5 Random Vibration ASTM D4728 E Vehicle Vibration
6 Impact ASTM D6344 J Concentrated Impact**
7 Drop ASTM D5276 A Handling

*N/A for porous materials
**Applicable to lightwieght singlewall corrugated shipping containers under 275 Burst or 44 Edge Crush Test (ECT).


Annother Distribution Cycle that is sometimes used when air transport will not be used in the distribution enviroment is DC3, and it shown below.

ASTM D4169 Distribution Cycle 3: Single package
without pallet or skid, LTL motor freight

ASTM D4169-05, DC=3 – testing sequence and types

Sequence Test Type Standard Schedule Description
1 Drop ASTM D5276 A Handling
2 Stacked Vibration ASTM D4728 D Vehicle Vibration
3 Fixed Vibration ASTM D999 F Loose-Load Vibration
4 Impact ASTM D6344 J Concentrated Impact**
5 Drop ASTM D5276 A Handling

**Applicable to lightwieght singlewall corrugated shipping containers under 275 Burst or 44 Edge Crush Test (ECT).

Page load link

Posted by: ngannganpaguine0272775.blogspot.com

Source: https://lso-inc.com/medical-package-testing/standards/astm-d-standards/astm-d4169/

Post a Comment for "Astm D4169-16 Pdf Free Download"